The details that turn a dressed robot into a polished one.
A suited Optimus looks professional. A suited Optimus with a pocket square and name badge looks like it belongs. Accessories are the difference between a robot wearing clothes and a robot that is dressed. The details communicate care, investment, and brand attention.
Every accessory in our line uses magnetic attachment. No pins puncturing fabric. No clips scratching chassis. No adhesives leaving residue. Magnets attach to the garment fabric, hold firm through a full shift of movement, and release cleanly for laundering.
Optimus cannot tie a knot. Its end-effectors do not have the finger dexterity. Our ties come pre-knotted with a magnetic bar behind the knot. The bar attaches to the shirt collar magnetically. The tie hangs at the correct length for Optimus's torso proportions and stays centered during arm movements.
Available in silk, technical microfiber, and knit. Silk is for formal deployments. Microfiber resists stains and dries fast for hospitality. Knit gives a casual, modern look for retail or co-working spaces.
The tie is the single highest-impact accessory. It takes an Optimus suit from "dressed" to "dressed well."
Pre-folded, magnetically attached to the breast pocket lining. The fold stays sharp throughout the day. Available in four fold styles: presidential (flat), puff, two-point, and three-point. Custom colors and embroidered monograms are available on orders of 10 or more.
A pocket square adds personality. Two Optimus units in identical suits become distinguishable when one has a navy pocket square and the other has burgundy. Fleet managers use color-coded pocket squares to assign robots to departments without changing the base uniform.
Magnetic-backed pins attach to the lapel without piercing the fabric. Standard options include the Maison Roboto monogram pin in brushed nickel and matte black. Custom pins with company logos are available with a 3-week lead time.
Name badges use the same magnetic system. A steel plate sits behind the garment fabric. The badge attaches on the outside. The plate is sewn into the garment at the factory. Swap the badge face to change the robot's displayed name or department.
All accessories are compatible with every Maison Roboto garment. The magnetic attachment system is standardized across our entire line.
Branded lanyards route below the chest sensor array and clip magnetically at the back of the neck. The lanyard holds ID cards, QR codes, or access badges. Length is calibrated for Optimus's torso so the card sits at mid-chest, visible to guests at conversation distance.
Custom-printed lanyards are the most cost-effective branding option. Minimum order is 25 units. Full-color sublimation printing. The lanyard doubles as a quick visual identifier for security and guest orientation.
Decorative only. Optimus does not have shirt cuffs that fasten, but our French cuff shirt variant accepts magnetic cufflinks for visual effect. The cufflinks are 18mm diameter and come in brushed stainless steel, matte black titanium, and gold-tone brass.
Cufflinks are a detail most people do not notice consciously. They notice subconsciously. A robot with cufflinks reads as higher-status. The effect is subtle and real.
Optimus end-effectors are the most visibly mechanical part of the robot. The joints, actuators, and gripping surfaces are exposed. Fitted gloves in stretch nylon cover the hands and soften the appearance. The fingertips use conductive fabric so capacitive touchscreens still respond to the robot's touch.
White gloves for formal. Black for corporate. Gray for casual. The gloves fit snugly over the end-effector geometry and do not reduce grip strength.
Our standard accessory kit includes one magnetic tie, one pocket square, one lapel pin, and one name badge. The kit is designed as a starting point. Most customers add gloves and a lanyard after their first deployment. Bulk kits for fleets of 10 or more ship at a reduced rate.
Yes, but not a conventional knotted tie. Our Optimus ties use a pre-formed knot with a magnetic bar that attaches to the shirt collar. The tie hangs naturally and stays in place during movement. No tying required.
Not if positioned correctly. All Maison Roboto accessories avoid sensor zones. Pins and badges attach via magnetic backing to garment fabric, never directly to the chassis. Lanyards route below the chest sensor array.
Yes. Pocket squares, lapel pins, lanyards, and name badges all accept custom branding. Minimum order for custom-branded accessories is 10 units. Turnaround is 2 weeks for embroidery, 1 week for printed items.